Thursday, July 1, 2010

The builds 66-68

15.0.68 (6/28/2010)

1. Fixed: Audio problem with Hauppauge WintTV HD PVR device.
2. Fixed: Bass management was not handling moving bass to the LFE channel properly.
3. Optimized: The low-pass and high-pass filters used for Bass Management, JRSS, etc. are about 38% faster.
4. Changed: A confirmation is shown when doing an 'Unstack' command on more than one stacked file (has 'Don't show this message again' box).
5. Changed: Auto-import will attempt to silently reconnect to any disconnected network drives before flagging a file as 'missing'.
6. Fixed: Ripping could show an 'Unknown encoder error' in rare cases. (hopefully fixed, feedback appreciated)
7. Changed: When viewing a file grouping, the 'Date Imported' will show the most recent import date of any file in the group instead of the average import date.
8. Changed: Added the 'Add View' command back to the tree right-click menu for a library view.
9. Changed: Putting the system to sleep will not stop playback automatically. (system will still allow a manual deep sleep (S3) while playing, but Media Center will prevent an automatic sleep)
10. Fixed: Some types of searches would not preserve the sequence number properly.
11. Changed: The 'Rename, Move & Copy Files' dialog auto-sizes columns on load and resize.
12. Changed: DLNA, Advanced options. If "present subtitle resources" is not checked subtitle resources will not be presented in the Content Directory under ANY condition, even if explicitly asked for. Prevents hard resets on some renderers.
13. NEW: Added DVB-T frequency table for Greece. Thanks to Arbiter for providing the info.
14. Changed: Ignore anything past the first 4 digits in a FLAC vorbis DATE tag.

15.0.67 (6/25/2010)

1. Changed: Updated Japanese translation (thanks to KANEY).
2. NEW: Bass management in DSP Studio > Output Format allows specifying a bass routing mode of remove, move, or copy.
3. Changed: Bass management uses a 24 dB/octave lowpass for creating redirected bass (previously used a 12 db/octave slope).
4. Changed: Tuned JRSS mixing level used when creating a LFE channel.
5. Changed: The previously selected file in Theater View > Playing Now > List will no longer be drawn bold if the list is not focused.
6. NEW: AVI videos can be streamed from Library Server using "J. River URL Reader" filter, so one does not have to wait for the entire file to be downloaded before playback starts.
7. Changed: Improved messaging of import when it's importing a large library as it, by design, works in batches of 10,000 files.
8. NEW: Added Output Format subwoofer crossover choice "Silence (use Room Correction or other DSP to fill)".
9. Changed: Made the 'Output Format' DSP a two-column layout with more verbose explanation of settings.
10. Fixed: Closing the program with Media Server running could stop playback in attached DLNA / Library Server zones.
11. NEW: Preliminary .srt and .sub subtitle support for the DLNA server. The subtitle file should be the same name as the original video file in the same path with either a .srt or .sub extension depending on what your renderer supports. Tested working with Popcorn hour. Needs more testing. The number of renderers that support this seem limited.

15.0.66 (6/24/2010)

1. Fixed: DLNA video conversion works now - was broken.
2. Changed: Improved the ordering of 'Bass Management' effects chain in 'Room Correction' DSP.
3. Changed: The 'Tone' Room Correction tool plays the tone adjusted by all other adjustments. (previously played full amplitude, unadjusted tone)
4. Fixed: 'Bass Management' settings were not properly persisting between sessions.
5. Changed: Improved Bass Management high-pass / bass redirection filters to offer higher quality. (done as two independent intersecting filters to allow curve tuning on each)
6. Fixed: MC would crash when it failed to convert certain audio formats.

No comments:

Post a Comment