The builds 88-92

15.0.92 (8/6/2010)

1. Changed: When zooming into a file in Theater View, the title is shown on the top roller to remove unneeded visual noise from file views.
2. Fixed: When playing a mono file with DSP Studio > Output Format set to 'No mixing', mono could still get mixed to stereo.
3. Changed: Added support for m4a and ogg files when connecting to a DLNA serverp.
4. Changed: When connecting to a DLNA server, more fields are retrieved (track #, etc.).
5. Changed: When acting as a DLNA server, if the automatic album artist is '(Multiple Artists)', this will be provided to clients connecting to the server.
6. NEW: Television recordings can now be scheduled on a Library Server client, and the actual recording will happen on the Library Server.
7. Changed: If a user does not explicitly pick a channel output mode with DSP Studio > Output Format, mono will automatically be output as two channel mono (can still force one channel output by enabling and configuring Output Format DSP).
8. Changed: Improved energy preservation math in Room Correction bass redirection system.
9. NEW: DLNA Controller will work without the DLNA server enabled. This means you can load a library (read DLNA server) and direct the output to a DLNA renderer with MC doing the controlling.

15.0.91 (8/5/2010)

1. Changed: Room Correction no longer considers channels with no data (because of 2.1 mixing) when calculating the maximum possible gain.
2. Fixed: After snapping the program to the edge of the screen, a single-click of the titlebar would unsnap it.
3. Changed: Snapping to the edges of the screen only happens if the mouse is stopped near the edge for a little delay, so dragging quickly between screens won't cause the program to jump around.
4. Changed: When connected to a Library Server, zones from the server will not appear as DLNA zones if they're also "There: " zones.
5. Changed: Library Server zones will get the same zone ID each connection so that settings like zone link timing persist between runs.
6. Fixed: After loading a different library, the Media Network engine (servers, DLNA control, etc.) would not be restarted automatically.

15.0.90 (8/4/2010)

1. Changed: Reworked zone presentation so that they are more hidden until there is more than one zone.
2. Changed: High resolution tooltips use Media Server client conversion settings, making display of RAW or other large images much faster (enable conversion in Options > Media Network).
3. Fixed: Right-clicking a non-active zone and picking 'DSP Studio...' or 'Playback Options...' would show dialogs for the current zone instead of the clicked zone.
4. Changed: DSP Studio shows a zone name instead of a zone ID in the titlebar.
5. Changed: When linking zones, if only one is playing, whatever is playing will begin playback in both zones.
6. NEW: When linking zones, if both are playing, a dialog will ask what zone to keep playing from.
7. Fixed: Zone linking could lose sync at track boundaries (only applies to build 88 and 89).
8. Fixed: When first linking two zones, the master zone would not update its playback settings to not suppress silence until switching to the next track.
9. Fixed: When linked zones drifted apart, they would not always be restarted after stopping them when the current track finished.
10. Fixed: Theater View did not work nicely on a touch screen where a mouse move was not simulated before a click.

15.0.89 (8/3/2010)

1. Changed: Updated Russian translation file (thanks to Vladimir).
2. Fixed: Removing a pane when another pane already had a selection could cause a crash.
3. Changed: When adjusting the timing of linked zones, a sync will happen after no changes are made to the slider for 2 seconds (was previously 1 second).
4. Changed: Visualization Studio is available again for 2D visualizations.
5. NEW: Chapters support for audio played in DirectShow.
6. Changed: OGG tags: Write new style replay gain and peak level tags with +-6db adjustment from MC's internal values. When writing the new tags, removes any old style tags. When reading tags and new style doesn't exist, uses the old style tags.
7. Changed: Scrolling a list with the mouse wheel without moving the cursor would not properly show tooltips when scrolling stopped.
8. Changed: Loading of high-resolution image tooltips is better threaded to avoid lags while an image loads.
9. Faster: Loading of PSD files is many times faster.

15.0.88 (8/2/2010)

1. Fixed: Spectrum analyzer visualizations did not move.
2. Fixed: The time was not appearing at the root of Theater View.
3. Fixed: The program would allow a user to delete all zones, causing a crash.
4. Fixed: It is no longer possible to delete a DLNA or Library Server zone. (use Options > Media Network to configure if remote zones should appear)
5. Changed: Added Options > General > Advanced > Reset saved Internet passwords... to allow clearing any stored internet passwords.
6. NEW: A new password dialog is shown when connecting to protected sites or Library Servers. Choosing 'Save password' will save the password between runs (previously it asked once each run for the password).
7. Fixed: Connecting to a Library Server from behind a passworded proxy did not always work nicely.
8. Changed: When downloading a resource in the background (Podcasting, Online Slideshow, etc.) URLs that require passwords will silently fail instead of showing password prompts.
9. Changed: The dialog for adjusting link timing is wider and has a smaller range (-2 seconds to +2 seconds) to allow easier control.
10. Fixed: When stopping linked zones, they could restart again.
11. Changed: Previous / Next commands work properly with linked zones.
12. Changed: When syncing linked zones, if any of the zones in the link are remote the delay before resuming is longer so that the remote zone has a chance to do any prebuffering.
13. Changed: When first creating a zone link, a DLNA zone from another Media Center could stay paused instead of starting playback.
14. Changed: When using linked zones, if any of the zones are remote, playback stops after each file and then starts up again in a few seconds (since controlling cross-fading, etc. isn't possible with remote zones).